2009 F8 W/ Single Pipe Clutch Kit
Clutch Alignment Tool for Z1 Turbo,M7 and Crossfire Models
98-2004 CHAINCASE STYLE CLUTCH ALIGNMENT TOOL
TORSIONAL CONVERSION KIT - for Diamond Drive models enables use with adjustable torsional style spring. Note: Need threaded helix and old style secondary spring. If using our purple secondary you can use the same angle helix.
Turn your Diamond Drive into an old style torsional spring set up to improve acceleration, backshift, and ease of tuning. Check out our installation instructions on our tech page!
This clutch is a direct fit for 2007 M & Crossfire 800 and 1000 sleds.It is a must when adding big HP kits to keep the belt from slipping. Clutch does not come with helix,spring or rollers.
Stock Pipe Clutch Kit Includes: Wieghts Springs Helix
Single Pipe Clutch Kit Includes: Wieghts Springs Helix
Twin Pipe Clutch Kit Includes: Wieghts Springs Helix
03 F7 Stock Pipe Grass Drag Clutch Kit -Designed for Reprogrammed ECU Box Part#: 200-7204
04 F7 EFI Stock Pipe Grass Drag Clutch Kit for Reprogrammed Box
04 F7 05/06 700 Sabercat Stock Pipe Clutch Kit
04 F7 SINGLE PIPE, 05-06 SABERCAT 7OO SINGLE PIPE CLUTCH KIT - WE RECOMMEND USING A 0627-020 BELT WITH THIS CLUTCH KIT
03-04 F7 Twin Pipes Clutch Kit
05 F7 Carb Stock Pipe Clutch Kit
05 F7 EFI Stock Pipe Clutch Kit
05 F7 Single Pipe Clutch Kit
05 F7 Twin Pipe Clutch Kit
05 F7 EFI Stock Pipe Clutch Kit for Machined Clutch and Polaris Belt
07 F8 Stock Pipe Clutch Kit Part#: 200-8700
07 F8 Single Pipe Clutch Kit Part#: 200-8701
07 Crossfire 800 Single Pipe Clutch Kit (0-3000ft Elevation)
07-08 F8 WITH SINGLE PIPE AND PORTING
07-08 CF/F8 Single Pipe/Shim Kit
07-08 CF/F8 Single Pipe/ Shim Kit
2008 F8/XF8 with Single Pipe and Y-Pipe Clutch Kit
2009 F8 Stock Pipe Clutch Kit
2009 F8 Twin Pipe Clutch kit
96-2006 Arctic Cat Clutch Puller
07 1000 Arctic Cat Clutch Puller
D&D Logo Billet Brake Lever Fits 06/07 Crossfire
Black D&D Reservoir Cover
Arctic Cat /Polaris- $240.00 per 3arm set Arctic Cat /Polaris- $315.00 per 4 arm set Specify quanity and if bushings are required when ordering Available in 40, 50, 60 and 72 gram increments with ...
A Bolt on replacement for the troubled Z1 JAG turbo! All parts and bushings can be replaced and serviced. We have added an option of a billet roller cover available in anodized red or natural finish. All other Tuners supplied
This is the same chaincase Glenn Hall used to power an F-1200 Turbocharged Arctic Cat to a 7.99 second pass @167 mph in a 1/4 mile run on the asphalt. The owner of the sled Jason Iras is a valued customer of Supreme Tool. SIDEWINDER ...
New Rage VIII (PATENT PENDING)YES ONE HAS BEEN FILED! RECORDS KEEP FALLING! TEAM ONE STOP PERFORMANCE Has been setting the bar higher at each event they attend. All done using the Rage VIII primary and Supertip cam arms. ...
(586) 294-4404
