2007-09 F/M/Crossfire 1000 Boondocker Control Box with Nitrous Capability

F7 Boondocker Control Box with Nitrous Capability. Works with all efi arctic cats, 600cc through 900cc from 2000 model year.

2009 F8 W/ Single Pipe Clutch Kit

Clutch Alignment Tool for Z1 Turbo, M7, and Crossfire Models

Clutch Alignment Tool for Z1 Turbo,M7 and Crossfire Models

98-2004 CHAINCASE STYLE CLUTCH ALIGNMENT TOOL

TurboSmart "E-Boost" Controller with up to 40 PSI; needed when installing larger turbo kits to go above 24 psi of boost.This is a nice small controller and easy to install and use. Also has RPM and Boost Recall functions.

Z1 Turbo Clutch Alignment Tool.

This is an Anti-Ratchet 10 Tooth for the Diamond Drive...Replace the stock drive sprockets with these Anti-Ratchet drivers. A must when making big HP and really hooking it up. For the EXT models this is one of the first performance mods that should ...

Stage 1 Exhaust Can

Stage I - (4 hp at stock boost up to 9hp with high boost 9 lb weight savings)
Stage II - (5 hp gain at stock boost - up to 10 hp gain at high boost 14 lb weight savings)
Stage III - (09 Turbo ...

Z1 Turbo Stage 2 Exhaust can

Stage I - (4 hp at stock boost up to 9hp with high boost 9 lb weight savings)
Stage II - (5 hp gain at stock boost - up to 10 hp gain at high boost 14 lb weight savings)
Stage III - (09 ...

Stage 3 Straight Pipe Exhaust for Z1 Turbo

Stage I - (4 hp at stock boost up to 9hp with high boost 9 lb weight savings)
Stage II - (5 hp gain at stock boost - up to 10 hp gain at high boost 14 lb weight savings)
Stage

The HiJacker! pump up the BOOST

Adjust your snowmobile HP from 180 to 260+. 16 different increments to dial in the horsepower you want at a push of the button. Make your sled scream!

This is a new intercooler for the Z1 Turbo along with the new charge tubes. This intercooler has more area than the stock intercooler for lower intake air temps and more HP. Charge tubes are polished.

These charge pipes are a serious upgrade over the stock charge tubes are are for use with the stock intercooler on the Z1 Turbo.

Get the most out of your stock turbo by adding this larger diameter High Flow CAST turbo outlet housing. The stock outlet is 1 3/4 ID VS the new HighFlow outlet 2 5/16 ID.This outlet will not work with stock exhaust or the original versions of the ...

Z1 Turbo Clutch Holder

TORSIONAL CONVERSION KIT - for Diamond Drive models enables use with adjustable torsional style spring. Note: Need threaded helix and old style secondary spring. If using our purple secondary you can use the same angle helix.

Turn your Diamond Drive into an old style torsional spring set up to improve acceleration, backshift, and ease of tuning. Check out our installation instructions on our tech page!

Z1 Turbo hole shot magna force weights. These hole shot arms will allow you to come out of the hole with the HiJacker button pushed without slipping the belt and hitting the rev limiter.

Z1 Turbo DDT1 90.5-98g D&D / Dalton Adjustable Weights. The DDT1 are the same arm that comes in the HiJacker clutch kit. The new DDT2 arms are the same profile as the T1's but with added weight for the big turbo's. Both of these arms have a special ...

Z1 Turbo DDT1 90.5-98g D&D / Dalton Adjustable Weights. The DDT1 are the same arm that comes in the HiJacker clutch kit. The new DDT2 arms are the same profile as the T1's but with added weight for the big turbo's. Both of these arms have a special ...

This clutch is a direct fit for 2007 M & Crossfire 800 and 1000 sleds.It is a must when adding big HP kits to keep the belt from slipping. Clutch does not come with helix,spring or rollers.

Z1 TURBO HIJACKER CLUTCH KIT - Comes with billet spider shim, adjustable clutch arms, helix, shift assist and a D&D performance belt - great for adjusting performance levels from 180hp to 260hp without removing clutch arms.

Stock Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

Stock Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

Stock Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

Single Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

Twin Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

03 F7 Stock Pipe Grass Drag Clutch Kit -Designed for Reprogrammed ECU Box
Part#: 200-7204

04 F7 EFI Stock Pipe Grass Drag Clutch Kit for Reprogrammed Box

04 F7 05/06 700 Sabercat Stock Pipe Clutch Kit

04 F7 SINGLE PIPE, 05-06 SABERCAT 7OO SINGLE PIPE CLUTCH KIT - WE RECOMMEND USING A 0627-020 BELT WITH THIS CLUTCH KIT

03-04 F7 Twin Pipes Clutch Kit

05 F7 Carb Stock Pipe Clutch Kit

05 F7 EFI Stock Pipe Clutch Kit

05 F7 Single Pipe Clutch Kit

05 F7 Twin Pipe Clutch Kit

05 F7 EFI Stock Pipe Clutch Kit for Machined Clutch and Polaris Belt

07 F8 Stock Pipe Clutch Kit Part#: 200-8700

07 F8 Single Pipe Clutch Kit Part#: 200-8701

07 Crossfire 800 Single Pipe Clutch Kit (0-3000ft Elevation)

07-08 F8 WITH SINGLE PIPE AND PORTING

07-08 CF/F8 Single Pipe/Shim Kit

07-08 CF/F8 Single Pipe/ Shim Kit

2008 F8/XF8 with Single Pipe and Y-Pipe Clutch Kit

2009 F8 Stock Pipe Clutch Kit

2009 F8 Twin Pipe Clutch kit

This Top Idler Wheel kit for EXT on 14" Track is an essential install when using a 14" Track. It keeps the track from getting sucked down between top wheels with the narrower track.

D&D Bullseye Air Intakes are great for any airbox; snowmobile, ATV, truck, or car. The principle is simple: more air = more power. Just drill a 1 1/2" hole and press in for more air flow. In most cases adding performance parts such as pipes, reeds, ...

D&D Bullseye Air Intakes are great for any airbox; snowmobile, ATV, truck, or car. The principle is simple: more air = more power. Just drill a 1 1/2" hole and press in for more air flow. In most cases adding performance parts such as pipes, reeds, ...

D&D Bullseye Air Intakes are great for any airbox; snowmobile, ATV, truck, or car. The principle is simple: more air = more power. Just drill a 1 1/2" hole and press in for more air flow. In most cases adding performance parts such as pipes, reeds, ...

D&D Bullseye Air Intakes are great for any airbox; snowmobile, ATV, truck, or car. The principle is simple: more air = more power. Just drill a 1 1/2" hole and press in for more air flow. In most cases adding performance parts such as pipes, reeds, ...

D&D Bullseye Air Intakes are great for any airbox; snowmobile, ATV, truck, or car. The principle is simple: more air = more power. Just drill a 1 1/2" hole and press in for more air flow. In most cases adding performance parts such as pipes, reeds, ...

This Z1 Turbo EXT 4-Wheel Kit helps with track alignment and offers more support. This kit is a must for good hookup when putting big power to the ground on the EXT model.

Adjustable Fuel Pressure Regulator

D&D Z1 TURBO BELT, HARD COMPOUND

96-2006 Arctic Cat Clutch Puller

02-08 Polaris Clutch Puller

Ski-Doo Clutch Puller

Yamaha Clutch Puller

07 1000 Arctic Cat Clutch Puller

For experienced Four-Stroke tuners only. A must for serious tuning.

A/C Billet Brake Res. Cover

A/C Non Vented Gas Cap

M SERIES BRAKE LEVER

D&D Logo Billet Brake Lever Fits 06/07 Crossfire

Black D&D Reservoir Cover

F1000 Reservoir Cover

Clutch Tool for 2008 XP 800

These cams are a stage one upgrade for the Z1 Turbo; for use with big turbo kits including the 2860. These run at 8800 RPM.

Z1 Turbo Head Gasket